Overblog
Edit post Follow this blog Administration + Create my blog
Cisco & Cisco Network Hardware News and Technology

How to Set up Cisco 7937G IP Phone?

July 22 2013 , Written by Cisco & Cisco Router, Network Switch Published on #Cisco IP Phones

The Cisco 7937 IP Phone is a conference room phone that offers superior wideband voice and microphone quality, with simplified wiring and administrative cost benefits. A full-featured, IP-based, hands-free conference station, the new Cisco Unified IP Conference Station 7937G is designed for use on desktops, in conference rooms, and in executive suites.

INSTRUCTIONS FOR SETUP

How-to-connect-a-Cisco-model-7937-conference-phone.jpg

CISCO IP PHONE/STATICALLY ASSIGN IP

Select your phone model and follow the corresponding instructions.

Cisco Unified IP Phone 7940 & CISCO IP Phone 7960

  1. Press the Settings button on the telephone
  2. Press 3 on the keypad
  3. Press 6 on the keypad and note the IP Address
  4. Scroll to Default Router 1 and note the Default Router
  5. Scroll to Subnet Mask and note the subnet mask
  6. Scroll to TFTP Server 1 and note the TFTP server
  7. Press 30 on the keypad
  8. Press the Edit softkey
    • If you do not see this softkey press *, *, #
  9. Select "No"
  10. For the following instructions, use the "Edit" softkey to enter the requested information. If you do not see the "Edit" softkey press *, *, #
  11. Press 6 on the keypad and enter the IP Address
  12. Scroll to Default Router 1 and enter the Default Router
  13. Scroll to Subnet Mask and enter the subnet mask
  14. Scroll to TFTP Server 1 and enter the TFTP server 

Cisco Unified IP Phone 7941, IP Phone7961 & Cisco 7970 IP Phone

  1. Press the Settings button on the telephone
  2. Press 2 on the keypad
  3. Press 6 on the keypad and note the IP Address
  4. Scroll to Default Router 1 and note the Default Router
  5. Scroll to Subnet Mask and note the subnet mask
  6. Scroll to TFTP Server 1 and note the TFTP server
  7. Press 22 on the keypad
  8. Press the Edit softkey
    • If you do not see this softkey press *, *, #
  9. Select "No"
  10. For the following instructions, use the "Edit" softkey to enter the requested information. If you do not see the "Edit" softkey press *, *, #
  11. Press 6 on the keypad and enter the IP Address
  12. Scroll to Default Router 1 and enter the Default Router
  13. Scroll to Subnet Mask and enter the subnet mask
  14. Scroll to TFTP Server 1 and enter the TFTP server 

More Related Cisco IP Phone Topics:

Cisco Unified IP Phones, CP-7937G-Well Designed for Conference

Two Smart Ways to Configure Cisco IP Phones

How to Connect Cisco IP Phones?

Cisco IP Phone Recommendation: Cisco Unified IP Phone 7942G-Enhanced Sound Quality

Top 5 VoIP Concepts to Know for CCNA Voice—VoIP Basic for CCNA Voice Exam

How to Configure a Cisco Unified IP Phone 7921 with Call Manager Express?

Share this post
Repost0
To be informed of the latest articles, subscribe:
Comment on this post