Overblog Follow this blog
Edit post Administration Create my blog
Cisco & Cisco Network Hardware News and Technology

Cisco Catalyst 3850 Series Licenses

October 28 2016 , Written by Cisco & Cisco Router, Network Switch Published on #Networking, #Cisco Switches - Cisco Firewall, #Technology, #Cisco License

LAN Base, IP Base and IP Services these 3 features are available with all Cisco Catalyst 3850 models. What are their features?

●   LAN Base: Enterprise access layer 2 switching features

●   IP Base: Enterprise access layer 3 switching features

●   IP Services: Advanced enterprise layer 3 switching (IPv4 and IPv6) features

1. The LAN Base feature set offers enhanced intelligent services that include comprehensive Layer 2 features, with up to 255 VLANs.

2. The IP Base feature set provides entry-level enterprise services in addition to all LAN Base features, with 1K VLANs. IP Base also includes the support for wireless controller functionality (mobility agent and mobility controller role; additional access point license required for mobility controller role), routed access, smart operations, FNF, and so on.

3. The IP Services feature set provides full enterprise services that include advanced Layer 3 features such as EIGRP, OSPF, BGP, PIM, and IPv6 routing such as OSPFv3 and EIGRPv6. All software feature sets support advanced security and MQC-based QoS.

The Cisco Catalyst 3850 Series Switches with LAN Base feature set can only stack with other Cisco Catalyst 3850 Series LAN Base switches. The same applies to IP Base and IP Services as well. A mixed stack of LAN Base switch with IP Base or IP Services feature set is not supported.

The 12-port and 24-port SFP+- and SFP-based models as well as the 48-port SFP+ model can only be ordered with IP Base or IP Services licenses. Therefore, in order to stack with LAN Base models, they need to be configured in LAN Base mode from the CLI.

Customers can transparently upgrade the software feature set in the Cisco Catalyst 3850 Series Switches through Cisco IOS Software CLI using the right to use (RTU)-based software upgrade process. Software activation enables the Cisco IOS Software feature sets. Based on the license’s type, Cisco IOS Software activates the appropriate feature set. License types can be changed, or upgraded, to activate a different feature set.

Software Policy for Cisco Catalyst 3850 Series Switches

Customers with Cisco Catalyst LAN Base and IP Base software feature sets will be provided with maintenance updates and bug fixes designed to maintain the compliance of the software with published specifications, release notes, and industry standards compliance as long as the original end user continues to own or use the product or up to one year from the end-of-sale date for this product, whichever occurs earlier. Customers with licenses for our IP Services software images require a service support contract such as Cisco SMARTnet Service to download updates. This policy supersedes any previous warranty or software statement and is subject to change without notice.

Cisco ONE Software for Cisco Catalyst 3850 Series

Cisco ONE Software for Access Switching is available for the Cisco Catalyst 3850 Series Switches.

Cisco ONE Software is a new way for customers to purchase and use our infrastructure software. It offers a simplified consumption model, centered on common customer scenarios in the data center, WANs, and LANs.

Cisco ONE Software and services provide customers with four primary benefits:

  • Software suites that address typical customer use scenarios at an attractive price
  • Investment protection of their software purchase through software services-enabled license portability
  • Access to ongoing innovation and new technology with Cisco Software Support Service (SWSS)
  • Flexible licensing models to smoothly distribute customer's software spend over time

For ordering information for Cisco ONE Software for the Cisco Catalyst 3850 Series Switches, go to http://www.cisco.com/c/en/us/products/software/one-access/switching-part-numbers.html.

Licenses for Cisco Catalyst 3850 Series Switches

Software Licenses

C3850-12-S-E

Cisco Catalyst 3850 12-port IP Base to IP Services RTU paper license

C3850-24-L-S

Cisco Catalyst 3850 24-port Switch LAN Base to IP Base RTU paper license

C3850-48-L-S

Cisco Catalyst 3850 48-port Switch LAN Base to IP Base RTU paper license

C3850-24-L-E

Cisco Catalyst 3850 24-port LAN Base to IP Services RTU paper license

C3850-48-L-E

Cisco Catalyst 3850 48-port LAN Base to IP Services RTU paper license

C3850-24-S-E

Cisco Catalyst 3850 24-port IP Base to IP Services RTU paper license

C3850-48-S-E

Cisco Catalyst 3850 48-port IP Base to IP Services RTU paper license

L-C3850-24-L-S

Cisco Catalyst 3850 24-port LAN Base to IP Base RTU electronic license

L-C3850-48-L-S

Cisco Catalyst 3850 48-port LAN Base to IP Base RTU electronic license

L-C3850-24-L-E

Cisco Catalyst 3850 24-port LAN Base to IP Services RTU electronic license

L-C3850-48-L-E

Cisco Catalyst 3850 48-port LAN Base to IP Services RTU electronic license

L-C3850-24-S-E

Cisco Catalyst 3850 24-port IP Base to IP Services RTU electronic license

L-C3850-48-S-E

Cisco Catalyst 3850 48-port IP Base to IP Services RTU electronic license

L-C3850-12-S-E

Cisco Catalyst 3850 12-port IP Base to IP Services RTU electronic license

Access Point Licenses

L-LIC-CT3850-UPG

Primary upgrade license SKU for Cisco 3850 wireless controller (e-delivery)

L-LIC-CTIOS-1A

1 access point adder license for Cisco IOS Software based wireless controller (e-delivery)

LIC-CT3850-UPG

Primary upgrade license SKU for Cisco 3850 wireless controller (paper license)

LIC-CTIOS-1A

1 access point adder license for the Cisco IOS Software based wireless controller (paper license)

Access Point License for Cisco Catalyst 3850: An access point license is required for Cisco Catalyst 3850 operating in mobility controller mode. No access point license is required for 3850 operating in mobility agent mode. This functionality is included in the IP Base feature set. Other devices that can act as mobility controller are the WLC 5760, WLC 5508, and WiSM2 wireless controllers. Access point licenses can be transferred only between two 3850 switches or between 3850 and 5760 controller and vice versa.

More info here: http://www.cisco.com/c/en/us/products/collateral/switches/catalyst-3850-series-switches/data_sheet_c78-720918.html?referring_site=RE&pos=1&page=http://www.cisco.com/c/en/us/products/collateral/switches/catalyst-3850-series-switches/qa_c67-722110.html

 

More Related…

New: Cisco 3850 as Mobility Controller

Updated: Cisco StackPower Technology for Cisco Catalyst 3850 Switches

Updated: Comparing the Newest Cisco 3850 Models

How to Change a Switch Member Number in a Cisco 3850 Stack?

How to Form a Stack-Wise and Power-Stack with Cisco Catalyst 3850?

Cisco Catalyst 3850 Series-“Auto-Upgrade” Feature

Share this post

Repost 0

Comment on this post

Marry 04/10/2017 08:19

Nice information